search

Rinnai Avenger 25 Plus Spezifikationen Seite 13

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 24
  • Inhaltsverzeichnis
  • LESEZEICHEN
    • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 12
Rinnai Australia 9 Operation Manual
HOW TO OPERATE THE HEATER
TO TURN THE HEATER ON
Before you begin, ensure that the Gas and Power have been connected correctly to the appliance.
To turn the appliance on press the ON/OFF button located on the control panel. For models that
are equipped with a remote control the ON button may also be used.
When pressed the appliance will begin to operate in the following factory preset manner:
• The default set temperature will be 22° C .
• The current room temperature will be displayed , /
• The On/Combustion indicator will illuminate Green (steady). Ignition will take 5 ~ 10 seconds.
The ON/Combustion indicator will change to Red (steady) after proper ignition has been
achieved to signify the correct burner operation.
TO ADJUST SET TEMPERATURE
The set temperature may be raised or lowered by use of the Up and Down buttons located on the
control panel. For models that are equipped with a remote control the Up and Down buttons may
also be used.
The following "SET" temperatures can be selected.
• 'L' for continuous combustion on lowest burner setting, without thermostatic control.
• Thermostatic control between 16º C to 26º C in 1º C steps
• 'H' for continuous combustion on highest burner setting, without thermostatic control.
The room temperature will display temperatures between 1º C to 30º C.
Once the temperature is set it will be stored in the microcomputers memory, if the temperature is not
adjusted further it will be available as the initial setting when the appliance is next used.
When using the appliance for the first time or after long periods of disuse, ignition may
not occur the first time it is operated as there may be air within the pipes. If ignition
does not occur after approximately 30-seconds the unit will cease operation
automatically. If this occurs press the ON/OFF button twice to restart. For models
that are equipped with a remote control the press the OFF button and then press
the ON button to restart.
The unit may make noises after ignition/extinction. This is due to expansion and
contraction of the heater components and is normal.
The heater will not immediately ignite if the ON/OFF button is pressed straight after
extinction. After approximately 20 seconds has passed, the heater will automatically
go into ignition mode.
Rooms may not arrive at the "SET" temperature due to the size and construction of
the room, location of the appliance or external temperatures.
If the appliance does not ignite then the pre-set temperature may already be higher
than the actual room temperature.
121715
13
2
12
33 31
13
2
ON
OFF
41
39
40
Avenger Blaze Dynamo
Enduro
2
39
15
17 31 33
12
NOTE
40
37
13
41
NOTE
Seitenansicht 12
1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 23 24

Kommentare zu diesen Handbüchern

Keine Kommentare
Verwandte Produkte und Handbücher für Raumheizungen Rinnai Avenger 25 Plus
Raumheizungen Rinnai Dynamo 15 Spezifikationen   (16 Seiten)
Raumheizungen Rinnai REH-20DT Bedienungsanleitung   (5 Seiten)
Raumheizungen Rinnai RHFE-557FTR Installationshandbuch   (28 Seiten)
Raumheizungen Rinnai Amplify Installationshandbuch   (32 Seiten)
  • Carrera Logic Soundlab Candle Brew Crew Central Rado
  • Shure Zusätzliche Musikausrüstung Hunter Thermostate Bushnell Teleskope Jasco Arbeitsscheinwerfer Makita Kabellose Kreissägen
  • Dell 1209S Projector Woodstock REBEL W2000 Samsung S32E360F Craftsman 37744 Hoover Z 400
  • Electrolux EUC2244AOV Bedienungsanleitung Acer X1311KW Bedienungsanleitung AEG L7FEE48S Bedienungsanleitung Orion STARMAX 90 EQ Bedienungsanleitung JVC GR-DF450 Bedienungsanleitung